Non-destructive balcony remediation

How the injection repair is done

Low-viscosity epoxy resin, or another compatible repair material, is installed through planned treatment points and directed into the identified void or defect within or beneath the tiled assembly.

1. 1

   Confirm the source

   Staged testing isolates the component involved.

2. 2

   Check the construction

   Tiles, substrate, drainage, movement and existing detailing are assessed.

3. 3

   Map and prepare

   Treatment points are set out and prepared.

4. 4

   Inject and reinstate

   Resin is injected, then treatment points and relevant joints are reinstated.

5. 5

   Cure and retest

   The system is allowed to cure, then retested when access and weather allow.

Other repairs we can complete

• Localised grout and joint sealing.
• Replacement of failed perimeter or movement-joint sealant.
• Repairs around thresholds, penetrations and balustrade interfaces.
• Localised outlet or drainage repairs.
• Post-repair testing and completion photographs.

When injection is not the right repair

Injection is not a blanket fix for every balcony. We check the tile bond, substrate, defect location, falls, drainage, movement and condition of the existing waterproofing before recommending it.

Loose finishes, unsuitable substrates, poor falls, structural movement or widespread waterproofing failure may still require tile removal or reconstruction. Any limits and remaining risks are documented before work starts.